The LCDSCOPE HDWVA has been designed to satisfy specific requirements requested by cost conscious users who need high quality, accuracy combined with familiar and intuitive operation.
The LCDSCOPE series has no cathode ray tube, using instead a liquid crystal display. It therefore has none of the problems associated with CRT’s such as focus, stigmatism, parallax, EHT failure or high maintenance costs.The LCDSCOPE contains the latest proprietary, digital designs from Hamlet, producing a range of unique PAL and NTSC devices, which may be used in a variety of environments. The LCDSCOPE makes an ideal replacement for existing or failing CRT units but is itself only 160mm deep. Like other innovative and award winning Hamlet products, the LCDSCOPE establishes a new method of measurement and monitoring utilising a base unit with two options, both of which may be retro fitted. As with all Hamlet products the LCDSCOPE includes a host of features and functions normally only associated with much more expensive devices.
• Unique Multi-Format, Waveform and Vectorscope with 4 audio bargraphs and polar audio displays.
• Dedicated LCD with white traces and graticules 3U high half rack width case
• Multi standard PAL / NTSC, Component (YCrCb RGB), Composite, YC, with HD and SD SDI
• 4 channels of Analog Audio with embedded audio
• Built-in low maintenance LCD.
• Full measurement functionality including, full field line select.
• Audio Stereo ¼” Prof jack socket.
• Proprietary processing of all signal inputs produces familiar composite and component trace displays
• Easy instant access to full functionality: Parade, 2H, H, Hmag, V, Vmag,
• Full field line select, Bow tie, Ext-Ref, HFT™ (Hands Free Timing™), Filtering
• Gamut display with LED indicator and audible alarm
• 10 operator mode memory store and recall locations
• Remote control via RS 232 or modem,
• Low power, compact and transportable
• 12VDC or in-built rechargeable battery powered, mains adapter included
• Only 160mm deep, rack mount, stand alone or portable operation.
• Weighs only 2.5Kg.
Standards supported
1920 x 1080/60/2:1 1920 I 74.25MHz.
1920 x 1080/59.94/2:1 1920 I 74.25MHz/1001
1920 x 1080/50/2:1 1920 I 74.25MHz
1920 x 1080/30/1:1 1920 P 74.25MHz
1920 x 1080/29.97/1:1 1920 P 74.25MHz/1001
1920 x 1080/25/1:1 1920 P 74.25MHz
1920 x 1080/24/1:1 1920 P 74.25MHz
1920 x 1080/23.98/1:1 1920 P 74.25MHz/1001
1920 x 1080/30 (sf) 1920 Seg Form 74.25MHz
1920 x 1080/29.97 (sf) 1920 SF 74.25MHz/1001
1920 x 1080/25 (sf) 1920 SF 74.25MHz
1920 x 1080/24 (sf) 1920 SF 74.25MHz
1920 x 1080/23.98 (sf) 1920 SF 74.25MHz/1001
1280 x 720/60/1:1 1280 P 74.25MHz
1280 x 720/59.94/1:1 1280 P 74.25MHz/1001
625 and 525
PAL and NTSC
INPUTS
Composite input. BNC connector with loop through output. Return loss better than 40dB. Zin of 22k. Max dc +/- 3 volts.
YC input. 4 pin mini din socket with loop through output. Return loss better than 40dB. Zin of 22k. Max dc +/- 3 volts.
Component input. 3 x BNC connectors with switchable terms. Return loss better than 40dB. Zin of 75R or 22k. Max dc +/- 3 volts. YCrCb or RGB.
HD Serial digital input. BNC connector. Input impedance 75 ohms. Max d.c. +/- 10V.
SMPTE 292 serial component. 800mV pp +/-10% auto equalised up to 300 metres of cable.
Serial digital output. BNC connector. Output impedance 75 ohms.
Equalised version of the serial digital input.
External ref input. BNC connector with loop through output. Return loss better than 40dB. Zin of 22k. Max dc +/- 3 volts.
AUDIO
4 x Analog balanced inputs. Zin 22K.
Embedded Audio all channels
AUDIO MONITORING OUTPUT
Quarter inch professional stereo jack.
REMOTE CONTROL
9 pin D socket for GPI, data up/down load and remote control.
POWER
10 to 13V d.c. to 2.1mm jack. 1A max.
ENVIRONMENT
Indoor use, 5 to 45 deg.C. Ambient to 2,000m.
Max humidity 80% to 31 deg.C decreasing to 50% at 40 deg.C.
Overvoltage category 2. Pollution degree 1.
DISPLAY AREA
Display 100mm x 75.5mm viewing area.
Waveform 256 pixels wide x 240 pixels high.
Audio/Gamut area 64 pixels wide x 240 pixels high.
WAVEFORM MONITOR
Response Flat is +/- 0.5% 50Hz to 30MHz.
Low Pass is -3db @ 1.5MHz, -60db @ 6.75MHz.
Timebase H, 2H and Hmag (x5). V, 2V and Vmag.
Line select is any line from the frame.
Parade is a 3H display of input or filter parade.
VECTOR MONITOR
Video Traditional component or composite display.
Component accuracy 0.2%. Bandwidth 15MHz.
Composite accuracy 1%. Bandwidth 1.3MHz.
Audio Stereo phase display of left or right audio pair. Phase accuracy 2 deg.
Gamut Poly™ display of RGB signal shows up illegal colours.
AUDIO MONITOR
Accuracy Better than 0.1db over full scale range.
Characteristics BBC, EBU, Nordic and VU.
PHYSICAL
DIMENSIONS: - 21.4 x 13.1 x 18.5cm.
WEIGHT: - 2.5Kg
WARRANTY: - 1 Year.
Extendable free on registration: - To 2 Years
LCDSCOPE HDWVA
HDWVA
Options
Q. Is the HDWVA suitable for multiformat monitoring situation
A. Yes
Q. Can I listen to the audio?
A. There is a headphone socket located on the back panel
Q.How do I adjust the volume of the audio?
A. There is a volume control located on the back panel
Q. How do I change the group to view from an embedded audio signal?
A. There is a set of 8 small switches in a row on the back panel. Switches 1 and 2 (4 options for the binary combination) allow the different groups to be selected
Q. How do I change the audio scale?
A. There is a set of 8 small switches in a row on the back panel. Switches 3 and 4 (4 options for the binary combination) allow the different scales to be selected
Q. How do I change the audio from analogue to digital?
A. There is a set of 8 small switches in a row on the back panel. Switch 6 allows the selection of either digital or analogue audio
Q. I am looking at an RGB signal but the display looks like a YUV picture
A. There is a set of 4 small switches in a row on the back panel. Switch 1 allows the selection between YUV and RGB inputs
Q. How long will the internal batteries last?
A. About 2-3 hours depending on usage
Q. How do I switch to RGB parade mode?
why cannot change the Parade over to RGB by doing the PARADE key/Power on as in Manual.
A. This is due to Displaying BOTH Waveform & Vectors whilst trying to do the change,so must be in Wave form Only
Q.I am running on mains and have no display on the screen.
A. If the battery switch is up i.e. run on batteries then after a time the batteries will flatten and not be able to power the display. When in this mode the mains power is not recharging the batteries
Please find our links to futher information, front and rear panel layouts, wiring diagrams, data sheets and operational manuals below:
Front panel
Rear panel
Wiring diagram
Operational manual
Ordering information