DISPLAY AREA
The waveforms are in boxes burnt into the video signal.
Small modes: Box is 128 lines high, with a width of 14uSec.
Expand mode: Box is 512 lines high, with a width of 42uSec.

SIGNAL CONNECTIONS
Inputs: BNC connector with loop-through output. Return loss is better
.than 40db. Input impedance 15K ohm,max d.c.+/- 10 volts.
Output: Output to monitor is 1 Volt to 75 ohms.
Option: The Pico Scope can be factory set such that on power-down, the unit is bypassed so that the output is directly connected to the input, and the loop output is disconnected.

SPECIFICATION
Response: FLAT is +/- 1% from 25Hz to 5.5MHz, -5% at 10MHz.
LPASS is a low pass filter -1db at 1MHz, -40db at 3.58 / 4.4MHz.
CPASS is a band pass filter -3db at +/- 750KHz.
Sensitivity: Black level displays 0%, white level displays 100%.
Calibrator: Error in CAL position is less than 1% (0.007V).
Calibration line variable over full signal range.
D.C. Restorer: Attenuation of less than 30% to line hum signals.
Display level change less than 2% for 1 volt change in signal level.

POWER
INT: 2 x 1.5V AA cells, life approx 4 hours (Lithium).
1.5 hours (Alkaline) or 1 hour (Nicad).
EXT: 8V-15V D.C. at 0.21 amp. Centre negative.

ENVIRONMENT
Indoor use, 5 to 45 deg.C. Ambient to 2000m.
Max humidity 80% to 31 deg.C decreasing to 50% at 40 deg.C.
Overvoltage category 2. Pollution degree 1.

PHYSICAL
DIMENSIONS: - 18 x 9 x 3.5 cm.
WEIGHT: - 450g or 500gr with batteries

WARRANTY: - 1 Year.
Extendable free on registration: - To 2 Years
By using the service area of our web site http://www.hamlet.co.uk/serv.html